Reverse Osmosis Whole House Water Filter System – 4000 Gallons Per Day

Description

Specifications

• Vertical Design
• Gallons Per Day: 4000 @ 77° F
• Dimensions (Approx.): 19″ x 23″ x 46″
• Weight (Approx.): 235 lbs.
• Concentrate Re-Circulate: Optional
• Auto Flush: Optional
• Element Size (in.): 4040 TFC HF1
• Elements (Qty.): 2
• Motor HP: 1.5
• Voltage: 110 or 220 Volts AC
• Hertz: 60 or 50 cycles
• Feed Connection: 1″
• Product Connection: 1″
• Waste Connection: 1″
• Minimum Feed Pressure: 45 psi
• Minimum NaCl – % Rejection: 96%
• Minimum Feed (GPM): 6
• Maximum Hardness: 15 Grains / Gallon
• Maximum TDS: 2000 ppm
• Operating Pressure: 150 psi
• Maximum NaCl – % Rejection: 98.5%
• Maximum Feed (GPM): 15
• pH Range: 3 – 11

• Membrane: Two 4″ x 40″ TFC HF1 Membranes, For maximum rejection of impurities and high flow.
• Membrane Housing: Two 4″ x 40″ Membrane, Housings features a patented design.
• Pump & Motor: One 1.5 HP Multistage Pump and Motor, 110 or 220 volts AC, 60 or 50 hertz, single phase, Designed for continuous high pressures.
• Frame: Aluminum, White powder coated, Corrosion resistant, and lightweight.
• Sediment Filter: One 4.5″ x 20″ Big White 5 Micron Sediment Filter, Removes sediments and protects the system.
• Carbon Filter: One 4.5″ x 20″ Coconut Shell Carbon Block Filter.
• GAC/ERA Filter: One 4.5″ x 20″ Coconut Shell GAC/Eagle Redox Alloy Filter.
• Filter Housing: Three 4.5″ x 20″ Big Blue Double Filter Housings, Offers durability and improved sealing capabilities.
• Pressure Gauges: Two 2.5″ Gauge, 0-300 PSI, Panel Mount Glycerin Filled, and Two 1.5″ 0-160 Top mount dry gauges, For monitoring the system’s operating pressure, the filter and carbon operating pressures.
• Low-Pressure Switch: One Low-Pressure Switch, a Safety device to protect the pump from running dry when there is insufficient feed water pressure.
• High-Pressure Switch: One High-Pressure Switch, Automatically starts when the tank pressure falls below 40 psi and stops when the pressure reaches 60 psi.
• Solenoid Valve: One Solenoid Valve, with Manual Override, 110 or 220 Volts 60 or 50 Hertz, Assists with the on/off functionality of the system.
• Concentrate Valve: One 1/2″ Brass Needle Valve, Regulates the product to waste ratio (systems recovery)
• Switch: One Manual On and Off Switch

• Flow Meters: One Product (0-10 GPM) & One Waste (0-10 GPM) Flow Meters, Enables operator to accurately adjust the product to waste ratio, and monitor systems performance.
• TDS Meter: One Panel Mount TDS Meter, Provides accurate readings of the feed and product water quality.
• Easy Maintenance & Operation: CRYSTAL QUEST® commercial reverse osmosis systems feature a compact design and have all of their components strategically located for easy access and inspection

Optional Features

• Stainless Steel Housings: Two 4” x 40” PuroTech Stainless Steel Membrane Housings 3/8” FNPT
• TDS Meter: One Panel Mount TDS Meter, Provides you with accurate readings of the feed and product water quality.
• Float Switch: One Mechanical Float Switch, For atmospheric storage tank applications.
• Concentrate Re-Circulation Flow Meter: One Waste (0-5 GPM) Flow Meters, Enables operator to accurately adjust the amount of waste re-circulated.
• Concentrate Re-Circulate: This feature offers a higher recovery rate for the system by taking a % of the wastewater and feeding it back into the system.
• Additional cost will apply to listed price for custom modification based on the water laboratory test report.
• Computer Controller: One Computer Controller, 110 or 220 volts AC, with a pre-treat lockout, tank full contacts, low-pressure monitoring, and alarm.